Remodel Your Kitchen With a Custom Range Hood Kit That

Remodel Your Kitchen With a Custom Range Hood Kit That’s Easy to DIY

Remodel Your Kitchen With a Custom Range Hood Kit That

When it comes to a remodel, a custom range hood kit may be just the thing you need. Not only is it simple to DIY, it will save you a ton of money in the long run.

Who Are Archways & Ceilings?

The best way to describe Archways & Ceilings is that it’s a high tech high end manufacturer of curved wood framing. They also do a good job of delivering the goods with a smile. A recent study showed that the company accounted for over one percent of the nation’s residential construction business, making them a tad bit larger than they were a decade ago. For starters, they have three manufacturing facilities located in Dallas/Fort Worth, Atlanta, and Anaheim, Calif. Despite the fact that they operate out of state, they make some slick products at a reasonable price. Their sales staff is on the ball and their warranty programs are unsurpassed.

In addition to their fab fabrication services, they also offer a DIY product line. They’re one of the few companies in the industry that have a truly omnichannel approach to customer service. As a matter of fact, they were so good that they were able to ship the tiniest of their simpler ceilings in as little as three days. Some of the same high quality materials found in their more complex projects are also available in their cheaper counterparts. Of course, their customer base includes architects and other construction types who have more discerning tastes. Whether they’re tackling a major remodel or just refreshing their inventory, they’ll have the materials they need at a cost that’s well under a typical lumberyard.

Assembling The Kit

If you’re building your own custom range hood, you’ll need to follow some simple steps. First, make sure you have the correct measurements. This will allow you to properly cut the wood to fit.

Next, you’ll need to decide how you want to attach the hood. Some hoods come with a mounting frame. You’ll need to secure the frame to your cabinets. A frame is necessary to ensure that the hood fits well.

Depending on the design of your hood, you may need to make a hole for the exhaust fan. There are several ways to do this. One way is to use a drill. Another is to use a drywall saw.

Once you have your ducting, you can use it as a guide to make a hole. This will save you from having to do it by hand.

The same method can be used for a hood that has a curved surface. However, this will require a different application.

If you want to be fancy, you can add a tile backsplash. This will help you cover the edge of your hood and add some style. It can also be secured to the base of the cover. For a more practical option, you could use a lightweight polyurethane.

The bottom piece of your hood will hold the exhaust fan. Make sure you measure the width of your cabinet. Ideally, it should be 16 inches wide.

If your range hood is made of a curved component, you’ll need to do some work on the drywall. You’ll need to seal the seams and use joint compound.

Lastly, you can make your own custom range hood kit. These kits are composed of a mounting frame, slats, and a front panel.

Install The Fan

If you’re installing the fan of a custom range hood kit, you’ll need to plan and measure carefully. The size of the hood and the location of the vent are two of the biggest factors to consider.

To start, measure and mark the width and depth of the area. You’ll want to leave room for a quarter-inch space for the hood.

Once the measurements are done, it’s time to cut the wood to the proper dimensions. You can use a circular saw or a miter saw. Be sure to use a straight edge and reference wood.

After you’ve cut the pieces, you’ll need to secure them together. Use 1-1/4″ wood screws. It’s best to have a second person help.

When you’ve finished, you can use caulk to seal the gaps between the ductwork and the hood. This will prevent insects from getting inside. Afterward, you’ll need to check for any leaks.

Before you can install the ductwork, you’ll need to determine where the studs are in the wall. If you’re not sure where they are, you can use a stud finder. Also, you can knock on the drywall to hear the studs.

Once you’ve figured out where the studs are, it’s time to cut a hole for the ductwork. This can be done with a sawzall. However, you may want to use a jig that has a pocket-hole drill bit.

If you don’t have a jig, you’ll need to drill a hole. You’ll need to do this on the side of the hood that’s not visible after it’s completed.

In addition, you’ll need to make sure the ductwork is long enough. If it isn’t, you can use a duct extension.

Finish The Exterior

The finish on the exterior of a custom range hood kit is an important aspect of the overall look and feel. There are several choices to choose from, including drywall, faux metal, wood veneer, and stone.

You should start by measuring the size and shape of your range hood. This should include the height and width of the front panel, the depth of the side panels, and the vent opening. Once you have your measurements, you can begin preparing your hood kit.

Next, you will need to cut your pieces. Using a circular saw, cut the wood to the required size. For example, if the top of the hood is 15 inches, then the sides will be 12 inches.

After cutting, you will need to place your wood into your frame. Make sure that the bottom piece of the hood is placed correctly to properly support the exhaust fan.

Once your frame is completed, you can begin attaching the curved side panels arches. It is a good idea to use wood screws for these. Typically, the manufacturer will supply the screws. Afterward, you can use a finishing nailer to secure the box to the front panel.

For your final piece of the custom hood kit, you will need to cut a piece to fit the vent hood insert. This will be a simple process. If you have any gaps or nicks in the wood, apply a wood filler. Apply the filler with a caulk gun or with a wet finger. Afterward, sand the seams and sand them smooth.

If you have any questions, you can call the manufacturer or the company that manufactures the custom range hood. Most dealers will send you a rough sketch of what the finished hood will look like.

Why You Should Try This

If you have the time and desire, you can create a custom range hood kit in your own kitchen. However, before you jump into the project, there are some basic instructions you should know.

First, you will need to determine the proper height for your vent hood. The height will affect efficiency. You can find out the correct measurements for your range hood with the help of a tape measure.

Next, you will need to decide if you need to have the hood attached to the ducting. If so, you will need to cut a hole. This should be a minimum of 2 inches in diameter.

You will also need to decide whether you want to use a damper or not. A damper is usually located on the outside of the house, but it can also be located inside.

After you have determined the appropriate dimensions for your range hood, you should design a plan. This should include the wood pieces you need. For example, you will need to have a piece of plywood for the front panel, a piece of poplar for the side panels and a piece of wood for the bottom.

Make sure you have the proper tools before you begin. A table saw is a good choice, but you can also use a circular saw. Alternatively, you can get your wood for free at a hardware store.

Once you have cut the necessary pieces, you can assemble your range hood kit. There are three steps to the assembly process: Nail, clamp, and finish.

One of the most important aspects of any range hood is the insert. The insert can be as small as two inches, but it should not be more than a few inches in diameter.

Table of Contents

Related Posts